The FLOX® burner series REKUMAT® C is characterized by an integrated ceramic high-performance heat exchanger. Thus, operating temperatures of up to 1,300 °C are possible.
Minimal thermal wear due to FLOX® combustion technology, as well as decades of experience make the Rekumat® C one of the most successful self recuperative burners globally.
The REKUMAT® C burner series is Green Gas Ready.
Input Rating
Rated power between 10 and 100 kW
Higher power upon request
Fuel Gas
Natural gas (standard): natural gas H, natural gas L, methane
Other gases (optional): hydrogen, propane, butane and other dust-free, non-aggressive gases
Supply Pressures
Fuel gas: 6000Pa (60 mbar), ± 5%
Combustion air: 8000 Pa (80 mbar), ± 5%
Maximum Operating Temperature
Direct heating: 1300°C
Indirect heating: 1250°C
Flame Supervision
Flame rod or UV sensor
Combustion Mode
Flame or flame/FLOX®
Control Method
On/Off
Customized solutions are available upon request.
Rexnord Kette GmbH and WS have successfully modernized a belt furnace, reducing the furnace's CO2 emissions by 35%. In addition to new burners with maximum energy efficiency, the optimization of the operating mode also contributes to the CO2 reduction.
Thanks to patented gap-flow technology, REKUMAT® S NT burners achieve the highest energy efficiency with the lowest emissions even at low furnace chamber temperatures below 600 °C.
The patented REKUMAT® CR burners allow for the first time the substoichiometric operation of a recuperative burner due to the integrated afterburner. Highest efficiency and lowest NOx emissions thanks to FLOX® technology.
REKUMAT® M series: Energy-efficient recuperative burners for radiant tubes and direct heating. Thanks to FLOX® with extremely low NOx emissions and ready for operation with green hydrogen.
Energy-efficient recuperative burner for indirect and direct heating applications. Revolutionary gap-flow technology for highest possible efficiency.
Energy-efficient ceramic recuperative burner for indirect and direct heating applications. Revolutionary gap-flow technology for highest possible efficiency, even at very high operating temperatures.
Sustainability and efficiency were the key objectives in the design of thyssenkrupp's state-of-the-art hot-dip coating line FBA 10. COO Dr. Heike Denecke-Arnold and Dr. Clemens Trachternach, Team Leader FBA 10, provide an exciting insight into the various parts of the ultra-modern line.
There was a lot to celebrate at the WS Summer Party 2024. Around 250 guests spent a thoroughly successful day in Renningen in the best weather and found out about the many new developments in the WS Group. Good food and a cold drink or two ensured a great atmosphere and fond memories.
Several high-ranking delegations from China visited WS in Renningen to find out about the best industrial burner technology available. The focus of the visit was on the low-emission and efficient heating of electric conveyor belt systems. Due to the increasing production of electric vehicles, this market segment is currently experiencing an upswing, particularly in Asia.
Fast for the few or slow for everyone? WS is pursuing its own concept when it comes to expanding the charging infrastructure for electric vehicles. In order to achieve a low-cost yet effective charging system on the factory premises, WS consistently relies on a low charging capacity.
