The REKUMAT® CS series of FLOX® burners combines highly efficient gap current recuperators with the temperature resistance of SiSiC high-performance ceramics. Superior efficiency even at the highest temperatures for maximum energy savings. Cutting-edge technology paired with "FLOX® insideguarantees lowest NOx emissions and maximized fuel flexibility.
Of course, also the REKUMAT® CS " seriesGreen Gas Ready".
Input Rating
between 40 and 80kW
Fuel Gas
Natural gas (standard): natural gas H, natural gas L, methane
Other gases (optional): hydrogen, propane, butane and other dust-free, non-aggressive gases
Supply Pressures
Fuel gas: 6000Pa (60 mbar), ± 5%
Combustion air: 8000 Pa (80 mbar), ± 5%
Maximum Operating Temperature
Direct heating: 1300°C
Indirect heating: 1250°C
Flame Supervision
Flame rod or UV sensor
Combustion Mode
Flame or flame/FLOX®
Control Method
On/Off
Customized solutions are available upon request.
Energy efficiency and environmental protection are the focus of the steel industry: WS delivers major order - retrofitting industrial burners instead of building new plants. The most economical way to comply with emission limits and maximum efficiency.
The targets set for CO2 savings and the reduction of NOx emissions at a well-known automobile manufacturer were achieved by using WS burners with ceramic finned recuperators in gas-fired pusher-type furnaces.
Rexnord Kette GmbH and WS have successfully modernized a belt furnace, reducing the furnace's CO2 emissions by 35%. In addition to new burners with maximum energy efficiency, the optimization of the operating mode also contributes to the CO2 reduction.
Thanks to patented gap-flow technology, REKUMAT® S NT burners achieve the highest energy efficiency with the lowest emissions even at low furnace chamber temperatures below 600 °C.
The patented REKUMAT® CR burners allow for the first time the substoichiometric operation of a recuperative burner due to the integrated afterburner. Highest efficiency and lowest NOx emissions thanks to FLOX® technology.
REKUMAT® M series: Energy-efficient recuperative burners for radiant tubes and direct heating. Thanks to FLOX® with extremely low NOx emissions and ready for operation with green hydrogen.
The new research field of thermal process technology is dedicated to the goal of defossilizing high-temperature processes above 1,000 °C. While some processes are flexible enough to be heated with renewable electricity, climate-neutral fuels will be necessary for many applications in the future.
Energy efficiency and environmental protection are the focus of the steel industry: WS delivers major order - retrofitting industrial burners instead of building new plants. The most economical way to comply with emission limits and maximum efficiency.
The targets set for CO2 savings and the reduction of NOx emissions at a well-known automobile manufacturer were achieved by using WS burners with ceramic finned recuperators in gas-fired pusher-type furnaces.
WS has been known worldwide for decades as the undisputed technology and market leader in the field of industrial burner technology for the thermoprocessing industry. For next-generation products, state-of-the-art manufacturing processes such as additive manufacturing are of course also used.
