The REKUMAT® CS series of FLOX® burners combines highly efficient gap current recuperators with the temperature resistance of SiSiC high-performance ceramics. Superior efficiency even at the highest temperatures for maximum energy savings. Cutting-edge technology paired with "FLOX® insideguarantees lowest NOx emissions and maximized fuel flexibility.
Of course, also the REKUMAT® CS " seriesGreen Gas Ready".
Input Rating
between 40 and 80kW
Fuel Gas
Natural gas (standard): natural gas H, natural gas L, methane
Other gases (optional): hydrogen, propane, butane and other dust-free, non-aggressive gases
Supply Pressures
Fuel gas: 6000Pa (60 mbar), ± 5%
Combustion air: 8000 Pa (80 mbar), ± 5%
Maximum Operating Temperature
Direct heating: 1300°C
Indirect heating: 1250°C
Flame Supervision
Flame rod or UV sensor
Combustion Mode
Flame or flame/FLOX®
Control Method
On/Off
Customized solutions are available upon request.
Rexnord Kette GmbH and WS have successfully modernized a belt furnace, reducing the furnace's CO2 emissions by 35%. In addition to new burners with maximum energy efficiency, the optimization of the operating mode also contributes to the CO2 reduction.
Thanks to patented gap-flow technology, REKUMAT® S NT burners achieve the highest energy efficiency with the lowest emissions even at low furnace chamber temperatures below 600 °C.
The patented REKUMAT® CR burners allow for the first time the substoichiometric operation of a recuperative burner due to the integrated afterburner. Highest efficiency and lowest NOx emissions thanks to FLOX® technology.
REKUMAT® M series: Energy-efficient recuperative burners for radiant tubes and direct heating. Thanks to FLOX® with extremely low NOx emissions and ready for operation with green hydrogen.
Energy-efficient recuperative burner for indirect and direct heating applications. Revolutionary gap-flow technology for highest possible efficiency.
Energy efficient, ceramic self-recuperative burner for radiant tubes and direct firing
Green hydrogen from bio gas with «FLOX® inside» is a key technology for successful ramp-up of the hydrogen economy.
With the help of a new electrolyser and surplus electricity from its own PV systems with a capacity of over 400 kWp, WS will supply the laboratories in Renningen with green hydrogen in future. Following the installation of the electrolyser at the end of 2023, the storage and pipeline infrastructure is now also fully operational.
FlexHeat2Anneal is a funded research project investigating the flexible use of hydrogen as a fuel for continuous process lines and galvanizing lines.
Fast for the few or slow for everyone? WS is pursuing its own concept when it comes to expanding the charging infrastructure for electric vehicles. In order to achieve a low-cost yet effective charging system on the factory premises, WS consistently relies on a low charging capacity.
